Ride In Style
ELITA ONE Ultralight Carbon Fiber Seat Post Road Bike 6CC 27.2mm
ELITA ONE Ultralight Carbon Fiber Seat Post Road Bike 6CC 27.2mm
Couldn't load pickup availability
✅Premium Carbon Construction
100% unidirectional carbon fiber (no bonding/bladder) for ultra-lightweight & targeted stiffness.
✅Versatile Sizing Options
Diameters (27.2/30.9/31.6mm) + lengths (300/350/400mm) to fit most bike frames.
✅Ultralight Design
The ELITA ONE Carbon Seat Post boasts an impressive weight of just 125-160g, making it an ultralight choice for cyclists seeking minimal
✅Saddle Rail Compatibility
Fits 7x7mm/7x9mm/7x10mm saddle rails; 5.5Nm torque spec for safe, secure installation.
✅Chemical-Free Construction
Designed with high-concerned chemicals-free materials, this seatpost ensures safety and environmental friendliness.
✅ Authoritative Test Certified
All items tested by INTERTEK per GB 3565.2-2022 standard | 100% qualified | Premium quality guaranteed!
ELITA ONE Carbon Fiber Seat Post 63C
Clamp diameter：Ø 27.2-30.9-31.6mm
Setback：0mm
Lenghts：300/350/ 400 mm
Minimum Insert：100 mm
Material：Carbon
Finish: Matte
Seatpost maximum locking torque：5.5nm
Saddle clamp tightening torque:5.5NM
Max. Permissible Weight:120 kg (265 lb)
Carbon top cover+ Carbon base suitable for: Ø 7 mm or 7x9 mm oval carbon rail saddle
NOTE1
1.This rod is a shipping support. Its damage will not affect the installation or use of this product.
YOU MUST DISCARD THIS ROD WHEN INSTALLING THE SEAT CUSHION！！！
CARBONE BASE NOTE2
1.Base: carbon fiber with oil-free eco-friendly paint. This allows the natural texture of carbon fiber to show through.
2.Each product features a unique carbon fiber texture—Beautiful and Distinctive.
Important Note
Due to differences in production batches, there may be slight variations in the appearance and style of the base.
Matte black paint finish and oil-free bare carbon finish will be shipped randomly.
Installation Instructions
1.Seat Tube
Tightening Torque
For metal bicycle frames, tighten to 4Nm
For carbon fiber frames, tighten to 4.5Nm
Maximum locking torque: 5.5Nm
2. Saddle clamp tightening torque
Recommended tightening to 4-5.5Nm
3.Installation Warnings
Ensure that the clamp opening is offset from the frame opening during
installation to avoid concentrated stress that may cause the seat post to
crack.
(NOTICE:For openings at both front and rear, the seat post clamp should be
offset to the side.)
Suggestion: Insert the seat post into the frame 10 cm.
